No sound after Windows update? If your USB headset, USB speakers, USB DAC or USB microphone stopped working after the September 2026 Windows update, the update is the likely cause. Microsoft has confirmed that some USB Audio Class 1.0 devices may fail to start or play no sound after it. In Device Manager the device often shows “This device cannot start. (Code 10)”.
Below: how to check whether your no sound after Windows update problem is this bug, what Microsoft has fixed so far, and the steps that get sound working again. Facts were checked against Microsoft’s release health pages on 5 October 2026.
Why there is no sound after the Windows update
The 8 September 2026 security updates introduced the problem. Microsoft then released emergency (out-of-band) updates on 14 September. These fixed the problem only for devices using 8-channel or 3D audio modes. As of 5 October 2026, Microsoft lists the issue as Mitigated, not resolved, and says it is still working on the other symptoms.
| Windows version | Update that caused it | Partial fix (14 Sept) |
|---|---|---|
| Windows 11 24H2 / 25H2 | KB5124008 | KB5129195 |
| Windows 10 22H2 | KB5122878 | KB5129236 |
Sources: Microsoft release health for Windows 11 and Windows 10. Microsoft lists other Windows 11, Windows 10 and Windows Server versions as affected too.
Symptoms Microsoft lists:
- The USB audio device shows Code 10 in Device Manager.
- No sound at all from the device.
- The volume slider does not respond.
- Sound settings are unavailable or do not open.
- Multichannel modes (8-channel, 3D audio) fail, while 2-channel (stereo) may still work.
Not sure yet: Microsoft has not said when the remaining symptoms will be fixed. The next regular update is due on Tuesday 13 October 2026 (the second Tuesday of the month), but Microsoft has not confirmed that it includes the full fix.
Step 1: Check if you have the USB audio Code 10 bug
- Right-click the Start button and choose Device Manager.
- Expand Sound, video and game controllers (and Audio inputs and outputs).
- Look for your USB device with a yellow warning icon. Double-click it. If the Device status box says This device cannot start. (Code 10), you likely have this bug.
- Now open Settings → Windows Update → Update history. If you see KB5124008 (Windows 11) or KB5122878 (Windows 10) installed around 8–10 September, that matches.
If your sound stopped on a laptop’s built-in speakers or a 3.5 mm headphone jack, this bug is probably not the cause. Jump to other causes of no sound.
Fix 1: Install the latest updates
The 14 September update fixed the problem for some people, and it is a cumulative update, so it also includes the September security fixes.
- Go to Settings → Windows Update and click Check for updates.
- Install everything offered, including KB5129195 (Windows 11) or KB5129236 (Windows 10) if it shows up.
- Restart the PC, then unplug the USB audio device and plug it back in.
If the update does not appear, you can get it from the Microsoft Update Catalog by searching the KB number. Pick the file that matches your Windows version and system type (x64 for most PCs).
Fix 2: Switch the device to 2-channel stereo
This is the workaround Microsoft mentions: some users got sound back by moving from multichannel or 3D audio to 2-channel mode.
- Press Windows + R, type
mmsys.cpland press Enter. The classic Sound window opens. - On the Playback tab, select your USB device and click Configure.
- Choose Stereo, click Next and finish the wizard.
- Turn off spatial sound: go to Settings → System → Sound, click your device, and set Spatial audio to Off.
- If your headset has its own app with “7.1 surround” or “virtual surround”, turn that off too.
If the device shows USB audio Code 10, it may not appear in the Sound window at all. In that case, try Fix 3 first.
After you switch to Stereo, check that both sides play correctly with our free speaker and headphone test.
Fix 3: Reset the device
- Unplug the USB device. Plug it into a different USB port, preferably directly on the PC, not through a hub.
- In Device Manager, right-click the device and choose Disable device, then right-click again and choose Enable device.
- If that fails, right-click it, choose Uninstall device (leave “Attempt to remove the driver” unticked), then click Action → Scan for hardware changes.
- Restart the PC.
These steps do not fix the USB audio Code 10 bug itself, but they help when the device got stuck after the update.
Fix 4: Use another output for now
If you need sound today, for a meeting or class:
- Use the PC’s 3.5 mm jack, HDMI monitor speakers or a Bluetooth headset. Microsoft’s notice is only about USB audio devices, so these should keep working.
- Some USB headsets also have a 3.5 mm cable or a Bluetooth mode. Use that until the fix arrives.
- For video calls, choose the working device in the app’s own audio settings (Zoom, Teams and Google Meet each have one).
Fix 5 (last resort): Uninstall the update
This removes the September security fixes, so your PC is less protected. Only do it if you depend on the USB device and the other fixes did not work.
- Go to Settings → Windows Update → Update history → Uninstall updates.
- Find the latest cumulative update for Windows (for example KB5129195 or KB5124008) and click Uninstall.
- Restart.
- Go back to Windows Update and click Pause updates so it does not reinstall straight away.
Check Microsoft’s release health page each week. Once Microsoft marks the issue as resolved, resume updates and install the fixed one. Do not leave updates paused for long.
Not a USB device? Other causes of no sound after Windows update
If you have no sound after Windows update but do not see Code 10 on a USB device, try these general checks:
- Wrong output selected: click the speaker icon on the taskbar, then the arrow next to the volume slider, and pick the right device.
- App muted: right-click the speaker icon → Open volume mixer and check the app’s own volume.
- Audio troubleshooter: Settings → System → Troubleshoot → Other troubleshooters → Audio → Run.
- Windows Audio service: press Windows + R, type
services.msc, find Windows Audio and click Restart. - Driver changed by the update: in Device Manager, open the audio device → Driver tab → Roll Back Driver (only works if an older driver is saved), or install the driver from your laptop maker’s support site.
Practical examples
- USB gaming headset with 7.1 surround: sound stopped after 8 September. Installing KB5129195 should fix it, because the 14 September update covers 8-channel and 3D modes.
- Cheap USB desk speakers showing Code 10: the 14 September update did not help. Using the PC’s 3.5 mm jack with other speakers is the quickest workaround until Microsoft’s full fix.
- Office PC with a USB headset for calls: use the laptop’s built-in mic and speakers for the day, and ask IT before uninstalling any update.
- USB microphone for YouTube recording: if it shows Code 10, recording software cannot see it. Try Fix 3, then Fix 5 if you cannot wait.
Common mistakes
- Buying a new headset. The device is usually fine. Test it on another PC or phone first.
- Ticking “Attempt to remove the driver” when uninstalling the device. For USB audio this is rarely needed and can remove a driver you need.
- Uninstalling updates and forgetting to resume them. Set a reminder for the next Patch Tuesday.
- Downloading “audio driver fixer” tools from unknown sites. They do not fix this Windows bug and may bundle adware.
- Changing many settings at once. Try one fix at a time and test sound after each, so you know what worked.
Related: How to fix Windows Update error 0x800f0922, Windows 11 black screen after login and Wi-Fi not showing in Windows 11.
FAQ
Why is there no sound after Windows update?
The 8 September 2026 updates (KB5124008 on Windows 11, KB5122878 on Windows 10) can stop some USB Audio Class 1.0 devices from working. Microsoft has confirmed the issue. If your sound loss is not on a USB device, check the output device, volume mixer and audio driver instead.
What does USB audio Code 10 mean?
Code 10 means Windows found the device but could not start it. After the September 2026 updates it is a known symptom of the USB audio bug.
Has Microsoft fixed the USB audio problem?
Partly. The 14 September out-of-band updates (KB5129195 for Windows 11, KB5129236 for Windows 10) fix 8-channel and 3D audio modes. As of 5 October 2026 Microsoft lists the issue as mitigated and is still working on the other symptoms.
Should I uninstall KB5124008?
Only as a last resort. Uninstalling removes security fixes. Try installing the latest updates, switching to 2-channel stereo and using another audio output first.
Does this affect Bluetooth or 3.5 mm headphones?
Microsoft’s known issue is about USB Audio Class 1.0 devices. Bluetooth and 3.5 mm headphones are not listed as affected.
When will the full fix come?
Microsoft has not given a date. Check the Windows release health page, and install the October update after it is released.


Pingback: File History Not Working? 5 Simple Fixes + Restore Files