How to Fix Windows Update Error 0x800f0922 in Windows 11 (9 Fixes)

Error 0x800f0922 means a Windows update downloaded but could not finish installing. Usually the PC restarts, shows “Something didn’t go as planned. Undoing changes”, and Settings then says Failed to install. Your files are not lost. Windows simply rolls back to how it was.

This guide explains what usually causes it and gives the fixes in order, from the quickest to the most thorough. It also covers the same code when you try to turn on .NET Framework 3.5 or Microsoft Print to PDF. The steps are for Windows 11, and most also work on Windows 10.

What error 0x800f0922 means

Microsoft lists 0x800f0922 as CBS_E_INSTALLERS_FAILED on its common Windows Update errors page. In plain words: one of the setup steps inside the update failed, so Windows undid the whole update.

Because many different things can break that step, the code alone does not tell you the exact cause. These are the causes that have been confirmed or are commonly reported:

  • A small or full system partition. In May 2026, Microsoft confirmed that update KB5089549 failed with 0x800f0922 on PCs with 10 MB or less free on the EFI System Partition (a small hidden partition used to start Windows). The install failed at about 35–36% during restart. Microsoft fixed it in KB5089573 and later updates (reported by gHacks).
  • No stable connection to Windows Update servers, for example through a VPN or proxy. This is widely reported, but Microsoft does not list it for this code on the page above.
  • Damaged Windows system files or a damaged update cache.
  • Low free space on drive C:.
  • A Windows feature that needs files from Windows Update, such as .NET Framework 3.5 or Print to PDF.

Before you start: note the KB number and your Windows version

  1. Press Windows + I to open Settings.
  2. Go to Windows Update → Update history.
  3. Find the update marked Failed to install. Write down its KB number (for example KB5129195) and the error code next to it.
  4. Press Windows + R, type winver and press Enter. Note the version (for example 24H2 or 25H2) and the OS build.

The KB number matters. Search “KB number known issues” and check Microsoft’s Windows release health page. If Microsoft has already confirmed a problem with that update, the fix is often just to wait for, or install, the next update.

Fix 1: Restart and try again

It sounds too simple, but some updates fail because another update or app was still busy. Click Start → Power → Restart (not Shut down, which can use Fast Startup and not fully restart). Then open Windows Update and click Check for updates.

Fix 2: Turn off VPN and proxy, use a stable connection

  1. Disconnect any VPN app and close it completely.
  2. Go to Settings → Network & internet → Proxy. Under Manual proxy setup, make sure Use a proxy server is off, unless your office set it up.
  3. Use a normal Wi-Fi or wired connection. Avoid a phone hotspot that is set as a metered connection, because Windows may hold back some downloads on metered networks.
  4. Try the update again.

Fix 3: Free up space on drive C:

Updates need space to unpack. Go to Settings → System → Storage. If drive C: has less than about 20 GB free, clean it up first:

  • Click Temporary files, tick Temporary files and Delivery Optimization files, then click Remove files. Untick Downloads if you want to keep that folder.
  • Uninstall apps you no longer use (Settings → Apps → Installed apps).
  • Move large videos to another drive or the cloud.

The 20 GB figure is a safe margin, not an official Microsoft number.

Fix 4: Run the Windows Update troubleshooter

  1. Open Settings → System → Troubleshoot → Other troubleshooters.
  2. Next to Windows Update, click Run. On newer builds this opens the Get Help app.
  3. Follow the prompts, restart, and try the update again.

It does not fix everything, but it resets common settings and takes two minutes.

Fix 5: Repair system files with DISM and SFC

This fixes damaged Windows files. Microsoft recommends these commands for component store problems.

  1. Click Start, type cmd, right-click Command Prompt and choose Run as administrator.
  2. Run the first command and wait. The progress bar can seem stuck for several minutes. That is normal.
DISM /Online /Cleanup-Image /RestoreHealth
  1. When it says The restore operation completed successfully, run:
sfc /scannow

Restart the PC and try the update again. If DISM fails with its own error, note the code and go to Fix 6.

Fix 6: Reset the Windows Update cache

Windows keeps downloaded update files in a folder called SoftwareDistribution. If a file there is damaged, the same update keeps failing. Renaming the folder makes Windows download fresh copies.

  1. Open Command Prompt as administrator.
  2. Run these commands one by one. Press Enter after each line:
net stop wuauserv
net stop bits
net stop cryptsvc
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old
net start cryptsvc
net start bits
net start wuauserv
  1. Restart and check for updates. The first check takes longer because Windows downloads everything again.

If a ren line says “Access is denied”, one of the services is still running. Run the net stop lines again, then retry. Your Update history list may look empty afterwards. That is expected and harmless.

Fix 7: Install the update manually

  1. Open the Microsoft Update Catalog (Microsoft’s official site).
  2. Search for the KB number you noted.
  3. Pick the file that matches your PC: Windows 11 version (24H2, 25H2…) and type (x64 for most PCs, arm64 for Snapdragon laptops).
  4. Download the .msu file, double-click it and follow the steps. Restart when asked.

If the manual install fails with the same code, the problem is inside Windows, not the download. Go to Fix 9.

Fix 8: Install the latest optional update

When Microsoft confirms a bug, the fix often comes first as an optional update. This is exactly what happened with KB5089549 in May 2026.

  1. Go to Settings → Windows Update → Advanced options → Optional updates.
  2. If you see a newer cumulative “Preview” update, install it.
  3. Then check for updates again.

Fix 9: Repair Windows without losing files

Windows 11 has a built-in repair that reinstalls the current version and keeps your apps, files and settings. According to Microsoft Support:

  1. Go to Settings → System → Recovery.
  2. Under Fix problems using Windows Update, click Reinstall now.
  3. Keep the PC plugged in and online until it finishes. It can take an hour or more.

This option needs Windows 11 22H2 or later with the February 2024 optional update or newer. It is not shown on PCs managed by an office or school. Back up important files first anyway.

0x800f0922 when installing .NET Framework 3.5

Some older apps ask for .NET Framework 3.5. If turning it on in Windows Features fails with 0x800f0922, Windows usually could not download the files.

  1. First try Fix 2 (VPN/proxy off) and turn it on again from Control Panel → Programs → Turn Windows features on or off.
  2. If it still fails, run this in Command Prompt as administrator:
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All

On office PCs, the IT team sometimes blocks Windows Update for features (a WSUS setting). Ask them, or install it from Windows installation media using the /Source option described in Microsoft’s .NET 3.5 DISM guide.

If you removed the “Microsoft Print to PDF” printer and Windows Features shows 0x800f0922 when adding it back, run this in Command Prompt as administrator:

DISM /Online /Enable-Feature /FeatureName:Printing-PrintToPDFServices-Features /All

Restart. The printer should appear in Settings → Bluetooth & devices → Printers & scanners. If it still fails, run Fix 5 first.

Advanced: check the EFI System Partition

Only do this if the update fails at about 35% during restart and none of the fixes above worked. These steps only read the free space. Do not delete anything from this partition.

  1. Open Command Prompt as administrator.
  2. Run mountvol Y: /s to give the partition the letter Y (use another letter if Y is taken).
  3. Run dir Y:\. The last line shows the free space in bytes. If you see “Access is denied”, skip this check and go to Fix 8.
  4. Run mountvol Y: /d to remove the letter again.

If free space is 10 MB (about 10,000,000 bytes) or less, you are likely hitting the same problem Microsoft confirmed in May 2026. Install the latest updates as in Fix 8. Enlarging this partition needs partitioning tools and can stop the PC from starting if done wrong, so ask a technician rather than trying it yourself.

Practical examples

  • Office laptop with a company VPN: the monthly update fails every time at home. Disconnecting the VPN (Fix 2) and checking again lets it install.
  • Old 128 GB laptop: drive C: has 4 GB free. Cleaning temporary files and Delivery Optimization files (Fix 3) gives 15 GB back, and the update goes through.
  • Same KB fails three times: the cache is likely damaged. Resetting the update cache (Fix 6) makes Windows download it fresh.
  • An older billing app asks for .NET 3.5 and it fails: the DISM NetFx3 command installs it once the PC can reach Windows Update.

Common mistakes

  • Turning off the PC during “Undoing changes”. Let it finish, even if it takes 20–30 minutes. Cutting power here can cause startup problems.
  • Downloading “update fix” tools from random sites. Use only Settings, Command Prompt and Microsoft’s own Update Catalog.
  • Deleting the SoftwareDistribution folder while services are running. Stop the services first, as in Fix 6.
  • Installing the wrong .msu file. An x64 file will not install on an arm64 laptop, and a 23H2 file will not install on 24H2.
  • Pausing updates forever. Pausing is fine for a week or two while Microsoft fixes a bad update, but monthly updates include security fixes. Resume them.
  • Running a full reset first. “Reset this PC” removes apps. Try Fix 9 (Reinstall now), which keeps them, before that.

If nothing works

  • Pause updates for one or two weeks (Settings → Windows Update → Pause updates) and wait for the next monthly update. Microsoft usually releases them on the second Tuesday of each month.
  • Post the KB number, error code and your build number on Microsoft Q&A. Other users often confirm whether it is a known problem.
  • On a company PC, contact your IT team before trying the advanced steps.

If your PC has other startup problems after an update, see our guide on Windows 11 black screen after login. If it feels slow after updating, try these fixes for a slow Windows 11 laptop.

Also read: Wi-Fi not showing in Windows 11 and Windows 10 ESU extended to 2027

FAQ

What does error 0x800f0922 mean?

It means a Windows update or feature could not finish installing, so Windows rolled it back. Microsoft lists it as CBS_E_INSTALLERS_FAILED. Common causes are a VPN or network problem, low free space, damaged system files, or too little space on the EFI System Partition.

Will I lose my files because of 0x800f0922?

No. The failed update is undone and your files stay as they were. Fix 9 (Reinstall now) also keeps your apps, files and settings, but back up important files before any repair.

Why does the update fail at 35% and undo changes?

In May 2026 Microsoft confirmed this pattern for update KB5089549 on PCs with 10 MB or less free on the EFI System Partition. Installing the later fixed updates solved it. Other causes are possible, so try the fixes in order.

How do I fix 0x800f0922 when installing .NET Framework 3.5?

Turn off any VPN or proxy, then run DISM /Online /Enable-Feature /FeatureName:NetFx3 /All in Command Prompt as administrator. On office PCs, the IT team may need to allow the download.

Can I skip this update?

You can pause updates for a few weeks, but do not skip them for long. Monthly updates include security fixes, and the next one usually includes everything the failed update had.

Does 0x800f0922 happen on Windows 10 too?

Yes. The same causes and most of the same fixes apply to Windows 10. The Reinstall now option in Fix 9 is a Windows 11 feature.

Share this post:

1 thought on “How to Fix Windows Update Error 0x800f0922 in Windows 11 (9 Fixes)”

  1. Pingback: Secure Boot Certificate Expiration 2026: Check and Fix

Comments are closed.

WhatsAppFacebookXLinkedInTelegram
Scroll to Top