This free online speaker test checks whether your speakers or headphones play sound from the correct side. Press Left, Right or Both and listen for beeps. You can also play a sweep from deep bass to very high treble to hear what your speakers can reproduce. It works with laptop speakers, desktop speakers, wired headphones and Bluetooth earbuds, and there is nothing to download.
Loading tool…
How to test your speakers or headphones
- Put on your headphones or earbuds, or sit in front of your speakers.
- Turn the volume low. Use the Volume slider on this page to start quietly.
- Press Left. You should hear beeps only in your left ear or speaker.
- Press Right. The beeps should come only from the right.
- Press Both. The sound should be centred and equally loud on both sides.
- Press Frequency sweep to play a tone that rises from deep bass (20 Hz) to very high treble (20 kHz). Press Stop sound at any time.
| Button | What you should hear |
|---|---|
| Left | Four short beeps from the left side only. |
| Right | Four short beeps from the right side only, at a slightly higher pitch. |
| Both | Four beeps from both sides, centred and equally loud. |
| Frequency sweep | One smooth tone rising from 20 Hz to 20 kHz in about 15 seconds, with the current frequency shown on screen. |
| Volume | Sets the test volume. It starts low on purpose. |
What the results mean
| You hear | Likely cause | What to try |
|---|---|---|
| Left plays on the right (or the other way round) | Earbuds worn the wrong way round, or channels swapped in the audio settings or cable. | Check the L and R marks, then check your audio settings. |
| One side is silent | A faulty driver, a damaged cable, or an earbud that is not connected. | Reconnect it, try another cable or device, and clean the plug. |
| One side is quieter | Balance set unevenly, or earwax blocking the earbud mesh. | Reset the balance and clean the earbud gently. |
| Every test plays from both sides | Mono audio is turned on, or the speakers are too close together to notice stereo. | Turn off Mono audio in your sound settings. |
| Rattling or crackling at one pitch | A damaged speaker, or something loose near it. | Check for loose parts and test on another device. |
What to expect from the frequency sweep
- Most adults stop hearing the tone somewhere between 14 kHz and 17 kHz. That is normal and gets lower with age.
- Small laptop and phone speakers cannot play deep bass, so the first part of the sweep may be silent below about 100–150 Hz. Good headphones usually go down to 20–40 Hz.
- The sweep is for a quick listen. It is not a measurement of how good your speakers are.
What this test can and cannot tell you
This page checks two-channel stereo. It can tell you whether left and right are correct and whether your speakers can play low and high pitches. It cannot test 5.1 or 7.1 surround channels, check speaker phase, or work as a hearing test. Results also depend on your device, your volume and your room, so treat the sweep as a listening check, not a measurement.
Keep the volume safe
- Start quietly and raise the volume slowly.
- Do not turn the volume up to chase a tone that fades away. That is your speakers or your hearing reaching their limit.
- Stop at once if a tone feels uncomfortable. Very loud low tones can also stress small speakers.
Sound problems on Windows 11? Try these fixes
- Turn off Mono audio. Go to Settings › Accessibility › Audio and switch Mono audio off.
- Check the balance. Go to Settings › System › Sound, open your output device and make sure the left and right sliders are equal.
- Pick the right output. Click the speaker icon on the taskbar and choose your headphones or speakers from the list.
- Check the audio format. In the same device page, make sure the format is a two-channel (stereo) setting.
- Try turning off audio enhancements. They can change how stereo sounds on some devices.
- Update the audio driver. Open Device Manager › Sound, video and game controllers, right-click your audio device and choose Update driver.
- Try another device. If the earbuds work properly on your phone, the problem is your PC. If not, the earbuds are the problem.
Microsoft lists more steps in its guide to fixing audio when no sound plays from speakers or headphones. If your sound stopped after an update, see our guide to no sound after a Windows update.
Sound problems on a Mac
Open System Settings › Sound and choose your speakers or headphones under Output. If your device shows a balance slider, make sure it sits in the middle. Apple explains the output settings in its page on changing the sound output settings on Mac.
Testing a phone speaker or earbuds on a phone
Open this page on your phone and use the media volume, not the ringer volume. Many phone speakers are mono or sit very close together, so you will not hear a clear left and right difference. For a proper stereo check on a phone, use headphones. Take off a tight case and clear any dust from the speaker grille if the sound is muffled.
Bluetooth earbuds and headphones
If only one earbud plays, put both earbuds back in the case, remove the pairing from your Bluetooth settings and pair them again. Microsoft describes the same fix in its guide to Bluetooth audio playing in only one channel. Our guide to fixing Bluetooth in Windows 11 covers pairing and disconnect problems. Shopping for new ones? See our list of the best ANC earbuds under ₹3,000, and our reviews of the JBL Tune 780NC and Marshall Major V. Whatever you buy, run this test in the first days so you can sort out a faulty side while returns are easy.
More free device tests
- Mic Test: check your microphone and record a short clip.
- Webcam Test: check your camera, resolution and frame rate.
- Keyboard Tester: find dead or stuck keys.
- Dead Pixel Test: look for dead pixels and backlight bleed.
- All free device tests: see every tool in one place.
Frequently asked questions
Is this speaker test free?
Yes. It is free, runs in your browser and needs no download.
Does it work for Bluetooth earbuds and headphones?
Yes. Connect them to your device first and make sure they are the selected audio output.
How do I know which side is left and which is right?
Earbuds and headphones are marked with an L and an R. Match them to the Left and Right buttons. For a broader explanation of how two channels create stereo sound, see stereophonic sound on Wikipedia.
Is the frequency sweep safe?
Yes, at a low volume. Start quietly and stop if any tone feels uncomfortable.
Is this a hearing test?
No. It only checks your speakers or headphones. If you notice changes in your hearing, see a doctor or an audiologist.
Does it test 5.1 or 7.1 surround sound?
No. It tests two-channel stereo only.
Can I use this to test new earbuds before the return window ends?
Yes. It is a quick way to catch a dead side, swapped channels or a rattling driver in the first days after buying.

